Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass Price in Kenya, Specifications & Features

The Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass is a replacement rear panel for repairing Galaxy S25-series smartphones with cracked, shattered, scratched, chipped or otherwise damaged back glass.

Each version is model-specific. Samsung lists the S25 at 146.9 × 70.5 × 7.2mm, S25+ at 158.4 × 75.8 × 7.3mm, S25 Edge at 158.2 × 75.6 × 5.8mm, and S25 Ultra at 162.8 × 77.6 × 8.2mm.

These physical differences, together with the different camera configurations, mean their replacement rear panels are not interchangeable.

Replacement Rear Glass for Galaxy S25 Series

A cracked or shattered back does not necessarily mean the entire phone needs replacing. When the frame and internal hardware remain serviceable, the damaged rear panel can be replaced independently.

The correct replacement restores the rear exterior while providing the appropriate openings for the camera modules and flash of the selected S25-series model.

Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass Price in Kenya

The Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass price in Kenya ranges from KES 4,299 to KES 4,999.

Where to Buy Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass in Kenya

Looking for where to buy Samsung Galaxy S25, S25+, S25 Edge or S25 Ultra Back Glass in Kenya? Get the appropriate replacement rear glass from Linkphones Center for repairing cracked, shattered, scratched or damaged Galaxy S25-series smartphones.

Visit Our Store

• Shop Name: Linkphones Center
• Location: HH Towers, Moi Avenue, 5th Floor, Shop 504, Nairobi CBD
• Call / WhatsApp: 0729 222 000
• Delivery: Nationwide delivery across Kenya, including Nairobi, Mombasa, Kisumu, Nakuru, Eldoret, Thika, Nyeri, Machakos, Meru and other towns.

Linkphones Center provides convenient shopping from our Nairobi CBD store together with nationwide delivery across Kenya.

Specifications & Features

Samsung Galaxy S25 Compatibility

The standard Galaxy S25 replacement rear panel is designed for the SM-S931 model family. Samsung identifies the Galaxy S25 as SM-S931B in its official model comparison.

Its dimensions are:

146.9 × 70.5 × 7.2mm

and it weighs approximately 162g. The standard S25 uses an Armor Aluminum frame.

The replacement back must match this smaller S25 chassis and its specific camera arrangement.

Samsung Galaxy S25+ Compatibility

The Galaxy S25+ replacement rear glass is designed for the SM-S936 model family.

Samsung specifies dimensions of:

158.4 × 75.8 × 7.3mm

with a weight of approximately 190g. Like the standard S25, it uses an Armor Aluminum frame.

Although the S25 and S25+ share a similar visual design, the larger dimensions of the Plus model mean their replacement backs cannot be interchanged.

Samsung Galaxy S25 Edge Compatibility

The Galaxy S25 Edge replacement back glass is designed for the SM-S937 model family. Samsung's official product listings identify the S25 Edge under the SM-S937 designation.

The S25 Edge measures:

158.2 × 75.6 × 5.8mm

and weighs only 163g, making it significantly thinner than the other S25 models.

Its ultra-thin construction means an S25 Edge-specific replacement panel is essential.

Samsung Galaxy S25 Ultra Compatibility

The Galaxy S25 Ultra replacement rear panel is designed for the SM-S938 model family.

Samsung specifies dimensions of:

162.8 × 77.6 × 8.2mm

with a weight of approximately 218g. It uses a titanium frame rather than the Armor Aluminum construction of the standard S25 and S25+.

The Ultra also uses its own camera configuration and therefore requires a dedicated S25 Ultra replacement back.

Gorilla Glass Victus 2 Rear Construction

Samsung's specifications list Corning Gorilla Glass Victus 2 as part of the durability package for the standard S25 and S25+. The S25 Edge also specifically uses Gorilla Glass Victus 2 on the back.

The S25 Edge differs at the front, where Samsung uses Gorilla Glass Ceramic 2, but the rear remains Gorilla Glass Victus 2.

Galaxy S25 Edge Ultra-Thin Rear Design

The S25 Edge deserves particular attention when selecting replacement glass because it is only 5.8mm thick.

Samsung combines this thin construction with a titanium frame, Gorilla Glass Ceramic 2 on the front and Gorilla Glass Victus 2 on the rear.

An S25+ rear panel cannot be used simply because the phones have similar height and width; the Edge has a fundamentally different chassis.

Model-Specific Camera Openings

The replacement rear panel must provide the correct openings for the selected phone's camera arrangement.

This is particularly important for the S25 Edge, which uses a distinctive camera layout built around a 200MP main camera, while the S25 Ultra uses its own multi-camera arrangement.

Always match the back glass to the exact device model.

No Rear Fingerprint Sensor Cutout

The Galaxy S25 family does not use the rear-mounted fingerprint reader found on older Samsung devices such as the Galaxy S8 and S9.

Samsung's S25 Edge specifications, for example, list a fingerprint sensor among the device's sensors while its rear design has no separate fingerprint-reader opening.

Replacement back glass therefore does not require a rear fingerprint-sensor cutout.

Suitable for Cracked or Shattered Back Glass

The replacement rear panel is suitable when the original back has:

• Cracked after a drop
• Shattered
• Chipped around the edges
• Developed deep scratches
• Sustained impact damage
• Become heavily worn
• Been damaged during a previous repair

Restores the Rear Exterior

Replacing damaged back glass helps restore the phone's exterior and provides proper coverage over its internal chassis.

It is particularly suitable when the display, cameras, battery, frame and other major components remain functional.

Four Different Chassis Designs

Samsung specifies:

• Galaxy S25: 146.9 × 70.5 × 7.2mm
• Galaxy S25+: 158.4 × 75.8 × 7.3mm
• Galaxy S25 Edge: 158.2 × 75.6 × 5.8mm
• Galaxy S25 Ultra: 162.8 × 77.6 × 8.2mm

The S25+ and S25 Edge are especially close in height and width, but the Edge is considerably thinner and uses a different chassis and camera arrangement. Their rear panels should not be treated as interchangeable.

Armor Aluminum & Titanium Construction

Samsung uses different frame materials across the S25 family:

• Galaxy S25: Armor Aluminum
• Galaxy S25+: Armor Aluminum
• Galaxy S25 Edge: Titanium
• Galaxy S25 Ultra: Titanium

The replacement back must be correctly aligned and bonded to the appropriate frame.

Professional Installation Recommended

Professional installation is recommended for Galaxy S25-series rear-glass replacement.

Removing an adhered rear panel involves heat and controlled separation. Incorrect techniques can damage the battery, wireless-charging hardware, cameras, frame, internal cables or other components.

The frame should also be cleaned correctly before replacement adhesive and the new rear panel are installed.

Water-Resistance Consideration

Samsung lists IP68 water and dust resistance across the Galaxy S25 family, including the S25 Edge, in the phones' original configuration.

Back-glass replacement requires opening the factory-sealed housing. The original IP68 protection should therefore not automatically be assumed after repair.

Proper adhesive application, resealing and testing are required to assess water resistance after installation.

Why Choose Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass

• Replacement rear glass for Samsung Galaxy S25 series
• Galaxy S25 option available
• Galaxy S25+ option available
• Galaxy S25 Edge option available
• Galaxy S25 Ultra option available
• Model-specific fit
• Correct rear-camera openings for each model
• Suitable for cracked rear glass
• Suitable for shattered back panels
• Suitable for scratched rear glass
• Suitable for chipped or damaged rear panels
• Restores the phone's rear exterior
• No rear fingerprint-sensor opening required
• Dedicated replacement for the ultra-thin S25 Edge
• Designed around the respective Galaxy S25-series chassis
• Professional installation recommended

Technical Specifications

• Product Type: Replacement Back Glass / Rear Battery Cover
• Brand Compatibility: Samsung
• Series Compatibility: Samsung Galaxy S25 Series
• Compatible Model: Samsung Galaxy S25
• Galaxy S25 Model Family: SM-S931 Series
• Compatible Model: Samsung Galaxy S25+
• Galaxy S25+ Model Family: SM-S936 Series
• Compatible Model: Samsung Galaxy S25 Edge
• Galaxy S25 Edge Model Family: SM-S937 Series
• Compatible Model: Samsung Galaxy S25 Ultra
• Galaxy S25 Ultra Model Family: SM-S938 Series
• Installation Position: Rear
• Camera Opening: Yes, Model-Specific
• Rear Fingerprint Opening: No
• Galaxy S25 Dimensions: 146.9 × 70.5 × 7.2mm
• Galaxy S25+ Dimensions: 158.4 × 75.8 × 7.3mm
• Galaxy S25 Edge Dimensions: 158.2 × 75.6 × 5.8mm
• Galaxy S25 Ultra Dimensions: 162.8 × 77.6 × 8.2mm
• Galaxy S25/S25+ Frame: Armor Aluminum
• Galaxy S25 Edge Frame: Titanium
• Galaxy S25 Ultra Frame: Titanium
• Galaxy S25 Edge Rear Glass: Corning Gorilla Glass Victus 2
• Original Water & Dust Resistance: IP68
• Installation: Professional Installation Recommended

Samsung's documentation confirms the four distinct model families and chassis dimensions, including the exceptionally thin 5.8mm Galaxy S25 Edge.

What's in the Box

• Samsung Galaxy S25, S25+, S25 Edge or S25 Ultra Replacement Back Glass ×1

Installation adhesive, repair tools, camera-lens glass and other replacement components are not included unless specifically supplied with the selected part.

FAQ

1. What is the Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass price in Kenya?

The Samsung Galaxy S25 | S25+ | S25 Edge | S25 Ultra Back Glass price in Kenya ranges from KES 4,299 to KES 4,999.

2. Where can I buy Samsung Galaxy S25-series Back Glass in Kenya?

You can buy Samsung Galaxy S25, S25+, S25 Edge and S25 Ultra Back Glass from Linkphones Center at HH Towers, Moi Avenue, 5th Floor, Shop 504, Nairobi CBD. Call or WhatsApp 0729 222 000. Nationwide delivery is available across Kenya.

3. Is Samsung Galaxy S25 back glass the same as S25+ back glass?

No. The Galaxy S25 measures 146.9 × 70.5 × 7.2mm, while the S25+ measures 158.4 × 75.8 × 7.3mm. Their replacement rear panels are different sizes.

4. Can I use Galaxy S25+ back glass on the Galaxy S25 Edge?

No. Although their height and width are similar, the S25+ measures 158.4 × 75.8 × 7.3mm, while the S25 Edge measures 158.2 × 75.6 × 5.8mm. The Edge also uses a different chassis and camera design.

5. Is Galaxy S25 Ultra back glass the same as S25+?

No. The Galaxy S25 Ultra measures 162.8 × 77.6 × 8.2mm and has a different camera arrangement and titanium chassis. It requires an S25 Ultra-specific rear panel.

6. Which model numbers are covered by these Galaxy S25 replacement backs?

The primary model families are SM-S931 for Galaxy S25, SM-S936 for S25+, SM-S937 for S25 Edge and SM-S938 for S25 Ultra.

7. What glass is used on the Galaxy S25 Edge back?

Samsung confirms that the Galaxy S25 Edge uses Corning Gorilla Glass Victus 2 on the rear, while its front uses Gorilla Glass Ceramic 2.

8. Does Galaxy S25-series back glass have a fingerprint-sensor hole?

No. The Galaxy S25 family does not use a rear-mounted fingerprint reader, so the replacement back does not require the fingerprint-sensor opening found on older Galaxy models.

9. Should Samsung Galaxy S25 back glass be professionally installed?

Yes. Professional installation is recommended because the original rear panel must be carefully separated and the replacement correctly aligned, adhered and sealed.

10. Will my Galaxy S25 remain water-resistant after replacing the back glass?

Samsung lists the Galaxy S25 family with IP68 water and dust resistance in its original configuration. However, factory water resistance should not automatically be assumed after the rear housing has been opened. Protection after repair depends on correct adhesive application, sealing, workmanship and testing.